About Us

OLEOLOGY™ was founded in Australia and since then operates around the country and South East Asia. Speciality in fluid solutions enables more efficient and cost effective treatment solutions with a lower waste, creating a strong ESG result.

Open side menu

Coal Mine Wash Bay Decontamination Plant, NSW

Sector: Mining
Location: New South Wales

15 kL/h containerised plant reduced TPH from up to 200 mg/L to below 10 ppm and TSS to below 15 mg/L for EPA-compliant discharge and dust suppression reuse.

Client: national coal producer with a new HV and LV wash bay, limited budget and EPA discharge conditions to the site dam.

Duty: 15 kL/h (350 kL/day); TPH 50 to 200 mg/L with grease and oil emulsions and suspended solids.

Plant: containerised, factory tested; sump oil skimming, then REGENerable media for suspended and oily solids, then MyCelx cartridge polishing; operator backwash.

Results: TPH below 10 ppm, TSS below 15 mg/L, oil droplets below 5 micron removed, sheen free; treated water reused for dust suppression; no dosing chemicals.

More Mining Case Studies

Gold Mine Wash Bay Water Recycling, Rural WA

40 ft containerised plant at up to 30 m3/h reduced oil from 100+ ppm to 0 to 2 ppm and TSS from 500 to below 5 ppm for Department of Health reuse.

Refuelling, Workshop and Wash Bay Retrofit, Pilbara Iron Ore WA

MyCelx retrofit removed detergent-emulsified fuel that defeated a coalescing plate separator and an air-induction hydrocyclone, delivering below 10 ppm TPH at 2.5 times the CPS flow.

Gold Mine Wash Water Treatment and Reuse, North-East of Kalgoorlie WA

Value-engineered 500 kL/day design removed a pond, avoided a second RO plant and delivered on time and budget in one 40 ft container.

Last updated